Clipper Blades

Suitable for clipping fine coated horses or for the secondary clip of the season. Not suitable for thick or coarse coats. This 505/511 blade set leaves 1mm of hair.

The Aesculap Coarse blade is perfect blade for clipping feathers, hogging, full body clips on horses & ponies with cushings or native/heavy breeds. It's also great for general cattle bodywork pre shows and tails.  This 505/507 blade set leaves 3mm hair 

Lister Coarse (CA2) blades leave 2.5mm The blades are suitable for all Lister clippers. If you are unsure about the type of blade you require, please don't hesitate to contact us or head over to our Learning Portal.

Lister fine (A2F) metal socket blades that leave 1.4mm of hair. Suitable for all Lister Clippers. If you are unsure about the type of blade you require, please don't hesitate to contact us or head over to our Learning Portal.

Lister Hog/Dog (A2H) metal socket blades. Available in 2 grades leaving 13mm/19mm of hair. If you are unsure about the type of blade you require, please don't hesitate to contact us or head over to our Learning Portal.

Livermyan Medium (A2) blades that leave ~2.3mm of hair. Compatible with most Liveryman, Wolseley and Liscop machines. If you are unsure about the type of blade you require, please don't hesitate to contact us or head over to our Learning Portal.

Liveryman Wide Fine 1mm (A5)

Liveryman Wide 2.4mm (A5)

Heiniger Surgical Clipper Blades that leave 0.5-1mm of hair. If you are unsure about the type of blade you require, please do not hesitate to contact us or head over to our Learning Portal.

Heiniger fine clipper blades that leave 1-2mm of hair. If you are unsure about the type of blade you require, please do not hesitate to contact us or head over to our Learning Portal.

Heiniger coarse clipper blades that leave 3-4mm of hair. If you are unsure about the type of blade you require, please don't hesitate to contact us or head over to our Learning Portal.

Hauptner coarse clipper blades that leave 3mm of hair. Blade identification numbers:   (Top) Cutter - 86833 & (Bottom) Comb - 86832 These blades will fit all Hauptner clippers with exception to the Hauptner 3000 as these clippers take Liveryman/Wolseley type blades. These can be found here. If you are unsure about the type of blade you require, please don't hesitate to contact us or head over to our Learning Portal.

Hauptner standard clipper blades that leave 2-3mm of hair. Blade identification numbers:   (Top) Cutter - 86833 & (Bottom) Comb - 86872 These blades will fit all Hauptner clippers with exception to the Hauptner 3000 as these clippers take Liveryman/Wolseley type blades. These can be found here. If you are unsure about the type of blade you require, please don't hesitate to contact us or head over to our Learning Portal.

Hauptner very fine clipper blades that leave >1mm of hair. Blade identification numbers:   (Top) Cutter - 86833 & (Bottom) Comb - 86844 These blades will fit all Hauptner clippers with exception to the Hauptner 3000 as these clippers take Liveryman/Wolseley type blades. These can be found here. If you are unsure about the type of blade you require, please don't hesitate to contact us or head over to our Learning Portal.

Liscop coarse (A6) clipper blades that leave 3mm of hair. Compatible with most Liveryman, Wolseley and Liscop machines. If you are unsure about the type of blade you require, please don't hesitate to contact us or head over to our Learning Portal.

Liscop fine (A22) clipper blades that leave 0.8-1mm of hair. Compatible with most Liveryman, Wolseley and Liscop machines. If you are unsure about the type of blade you require, please don't hesitate to contact us or head over to our Learning Portal.

Kerbl Liveryman/Wolseley/Liscop fit very fine blades that leave ~0.5mm of hair. Compatible with most Liveryman, Wolseley and Liscop machines. If you are unsure about the type of blade you require, please don't hesitate to contact us or head over to our Learning Portal.